How To Set Time And Date On Spypoint Camera

QUICK Showtime GUIDE
FORCE-twenty
AND
COMPARABLE *

IN THE BOX

1x Photographic camera
1x 16 GB SD carte
1x Installation strap
1x Quick Outset Guide

Notation
Batteries sold separately.
User Manual, software updates & FAQs available at:
world wide web.spypoint.com/support.

COMPONENTS

1 LED

ii Lite sensor

3 Photo lens

4 Detection lens

5 Locking latch

6 Slot for installation strap

seven 12 V jack

8 Screw-thread for standard ¼"-20

9 LCD screen

x OK push

xi Switch ON/SETUP/OFF

12 Navigation buttons

13 SD card slot

14 Battery compartment

The specifications and characteristics of similar models may vary. Refer to the website or packaging for details.

PREPARATION

The camera was designed to operate with an SD card, form 10, betwixt 2 and 32 GB of memory.

SELECT A Ability SOURCE

Brand sure to insert the AA batteries co-ordinate to their polarity (+) and (-).

FOR MAXIMUM PERFORMANCE AND WITHOUT LEAKING BATTERIES

Use new batteries.
Use ONLY alkali metal or ONLY lithium batteries.
Do non mix new and old batteries.
Do not employ rechargeable AA batteries, as their lower voltage may cause operating difficulties.

INSERT AN SD CARD

Make sure the camera is turned OFF.
Locate the SD card slot. It is on the right, above the LCD screen (see diagram).
Insert an SD card (up to 32 GB) in the slot and brand sure to respect the direction indicated in the diagram.
The carte du jour is inserted correctly when a click is heard.

FORMAT YOUR SD CARD
Before inserting the SD carte du jour in your camera, it must be formatted to ensure proper operations. Run into department OTHER OPTIONS on page 8 for an explanation of the formatting procedure.

SETUP

Use the buttons to switch to the LCD display or to modify options, and press OK to select. Several setup pages will exist displayed.
GENERAL SETTINGS SETUP

To turn the camera ON/OFF, use the ON/SETUP/OFF switch.
The switch must be on SETUP to make your initial changes.
When the switch is on SETUP, press OK to open the Card:
• Set the language (English, Français, Deutsch)
• Prepare the appointment (DD/JJ/YYYY or DD/MM/YYYY)
• Gear up the time (12 h or 24 h)
• Set the temperature (°F/ °C)

ADJUST THE SETTINGS FOR THE 3 MODES OF Functioning Photograph MODE
Filibuster: This allows you to select the time elapsed before the photographic camera can detect again and have the adjacent photo.
If you want to capture multiple photos, use a shorter delay.
In one case you have selected the filibuster, printing OK.
Quality: This allows you to select a resolution of 20 MP or 3 MP. In one case yous have made your selection, press OK.
Multi: This allows y'all to select the number of photos to exist taken per shot (from ane to 5 photos). One time you have made your selection, press OK.
Notice: This allows you to set motility-detector sensitivity (Low, NORMAL, Loftier, Motorcar). Once y'all accept made your option, press OK.
VIDEO MODE
Delay: This allows you to select the time elapsed before the camera can observe again and take the next video.
Quality: Allows y'all to cull between Hard disk and VGA. One time you have fabricated your pick, press OK.
Length: This allows the user to choose the video length (ten to 60 southward). Once you take made your selection, press OK.
Detection: This allows you to fix move-detector sensitivity (Low, NORMAL, HIGH, Auto). Once y'all have made your selection, press OK.
TIME-LAPSE MODE
Allows you to take photos at regular predefined intervals without necessarily detecting a move.

Night: Choose the Heave option for maximum brightness for night vision. Select the OPTIMAL to reduce fuzziness at nighttime. One time yous have fabricated your option, press OK.

OTHER OPTIONS
Name: Allows to give a proper noun to your camera.
Most: Indicates the software version.
Default: Resets all default settings.
Format: This allows the camera to format the SD card the side by side time it is used. (Reformatting the SD card will delete all photos and videos on the menu. Just format the card if you are sure you want to delete everything on information technology. Transfer all data to your computer beforehand).

OPERATION

In one case the setup is consummate, turn the button from SETUP to ON.
Yous may as well switch from SETUP to OFF and plough the device ON after.
Crimson Calorie-free ON THE FRONT OF THE CAMERA
When the switch is in the SETUP position, the cherry-red light will flash to confirm a motion detection once yous take adjusted your settings.
When you move the switch to the ON position, the scarlet light at the front of the camera will wink for 30 seconds to let y'all to move out of the camera's field of view.
When the low-cal turns off, the photographic camera is gear up for utilize.
INSTALLATION
Recommended height of installation:
The camera must be installed at the top of the centerline of the brute's torso.
Ideal setup for high-quality images and videos:
The target animate being should be 7.v yard from the photographic camera to go a better line of sight.
To produce brighter photos at night, there should exist items reflecting the camera's flash in the background.
Please notation that the camera should never be directly pointed at the sunday to avoid backlighting and faulty detections.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Functioning is subject to the following 2 conditions:\

This device must non cause harmful interference.
This device must take any interference received, including interference that may cause undesired operation.

THE SPYPOINT Experience
(Online scouting tools)
To ensure that you utilize your trail camera optimally and that it precisely meets your needs and ultimately to ensure greater success as a hunter, SPYPOINT offers yous a range of useful additional digital features.
For more details on the SPYPOINT Feel, refer to the following website world wide web.spypoint.com/en/experience-spypoint.

DISPOSAL
ONLY USE ORIGINAL SPARE PARTS AND ACCESSORIES.
If, 1 day, your camera has been used and so intensively that it has to be replaced, or if you no longer have any use for information technology, you are obliged to dispose of information technology at a recycling center.
Information on return points for your electrical appliance tin can be obtained from your local waste material disposal company or from your local authoritative offices.
Electric appliances not only contain valuable recyclable raw materials but likewise substances that, if disposed of improperly, can affect public wellness and the environs. Assistance ensure that valuable raw materials are recycled by returning your erstwhile appliance to a primal collection signal.
The WEEE (Waste Electric and Electronic Equipment Directive) symbol represents the obligation of the labeled camera to be sent to a separate center for the proper recycling of electrical and electronic equipment.

Cheers FOR CHOOSING

WARRANTY

Sit back and relax every bit this device is covered by the "Know you're covered" 2-year warranty. We strive to provide our customers with a positive experience and outstanding service.

For a complete list of specifications, features, and settings, visit our Strength-twenty folio at www.spypoint.com.

Ezoic